Alloy Grinders (4)
- AG04 High Speed Alloy Grinder By RayFoster
 | RayFoster AG04 High Speed Alloy Grinder
Manufacturer: RayFoster
Model: AG04
For 60 years Foster High Speed Alloy Grinders have been providing precise, efficient, and reliable service worldwide. Rugged and comfortable to use, the Foster Alloy Grinder is a proven time saver when it comes ... |
- AG05 High Speed Alloy Grinder By RayFoster
 | RayFoster AG05 High Speed Alloy Grinder
Manufacturer: RayFoster
Model: AG05
For 60 years Foster High Speed Alloy Grinders have been providing precise, efficient, and reliable service worldwide. Rugged and comfortable to use, the Foster Alloy Grinder is a proven time saver when it comes ... |
- 2000 High Speed Grinder By Hanlder
 | The 2000 H/S Grinder is the same as the 1000, but contains the addition of a variable speed foot control and a flexible shaft with a manual Jacobs style handpiece. |
- 1000 High Speed Grinder By Handler
 | The 1000 H/S Grinder develops 1/4 HP at speeds up to 18,000 rpm. Based on an old reliable design, the 1000 is an affordable alternative to a larger H/S Grinder. |
|
|
Articulators (10)
- 72 Atlas-Apex Type Articulators (pack of 5) By Handler
 | Handler 72 Atlas-Apex Type Articulators (pack of 5)
Manufacturer: Handler
Model: 72
Atlas articulators have been used by leading dental technicians and dentists for many years. The 72 is constructed of bronze castings with a center support for durability and better plaster retention. Ma... |
- 57 Chrome Articulator (pack of 12) By RayFoster
 | RayFoster 57 Chrome Articulator (pack of 12)
Manufacturer: RayFoster
Model: 57
Foster Crown & Bridge Articulator, Width at joint is 1-3/8” with a vertical span of 1-3/4” when bows are parallel, has a rear adjustable stop. |
- 50 Chrome Articulator (pack of 12) By RayFoster
 |
RayFoster 50 Chrome Articulator (pack of 12)
Manufacturer: RayFoster
Model: 50
Foster / Apex #2 Articulator, The width at the joint is 1-3/4” with a ... |
- 50A Brass Articulator (pack of 12) By RayFoster
 |
RayFoster 50A Brass Articulator (pack of 12)
Manufacturer: RayFoster
Model: 50A
Foster / Apex #2 Articulator, Dimensionally the same as Catalog #50, but ca... |
- 51A Brass Articulator (pack of 12) By RayFoster
- 51 Chrome Articulator (pack of 12) By RayFoster
 | RayFoster 51 Chrome Articulator (pack of 12)
Manufacturer: RayFoster
Model: 51
Foster #8 Articulator, This articulator is 2-5/8” wide at the condyle and has a vertical parallel clearance of 2-5/8”. The finish is bright chrome. |
- 56 Brass Articulator (pack of 12) By RayFoster
 | RayFoster 56 Brass Articulator (pack of 12)
Manufacturer: RayFoster
Model: 56
Foster #7 Articulator with Anterior Pin, Extra wide (3-1/2”) at the condyle with a vertical parallel clearance of 2-3/4”, with adjustable anterior pin stop and posterior screw stop. Cast of heavy g... |
- 54 Brass Articulator (pack of 12) By RayFoster
 | RayFoster 54 Brass Articulator (pack of 12)
Manufacturer: RayFoster
Model: 54
Foster #3 Articulator with Anterior Pin, Parallel clearance and condyle width are the same as the #51 Articulator. This articulator is equipped with an adjustable anterior pin stop and posterior screw stop, an... |
- 57A Brass Articulator (pack of 10) By RayFoster
 | RayFoster 57A Brass Articulator (pack of 10)
Manufacturer: RayFoster
Model: 57A
Foster Crown & Bridge Articulator, Dimensionally the same as Cat. #57, except with a full 2” parallel clearance between upper and lower bows, with a smooth polished brass finish. |
- 60 Chrome Articulator (pack of 10) By RayFoster
 | RayFoster 60 Chrome Articulator (pack of 15)
Manufacturer: RayFoster
Model: 60
Foster Crown & Bridge Spring Articulator, This unique articulator allows total flexibility when applying protrusive and lateral movements. The upper bow can be reversed to provide a parallel clearance of ... |
|
|
Burners (10)
|
Casting Machines (3)
- Exac-U-Cast By Handler
 | A Centrifugal Casting Machine designed for use in casting precious and non-precious metals. The Exac-U-Cast features a hardened steel center shaft which is mounted between two double shielded ball bearings. |
- Castmaster™ II Casting Machine By Buffalo Dental Manufacturing Co.,
 | The Castmaster II is a more economical casting machine with a classic design that helps assure a straight, smooth flow of gold and dense castings. The unit features a heavy duty spring and heavy base to promote safe and powerful operation. |
- AccuCast™ Premium Casting Machine By Buffalo Dental Manufacturing Co.,
 | The rugged, improved, patented centrifugal casting machine with pre-calibrated balancing that helps ensure superior, dense castings every time. The rugged construction promotes safe operation and a long working life, and the positive locking crucible carrier secures type-A crucibles and preven... |
|
|
Chucks (9)
- 16B-1 No. 16 Chuk/Changer By Handler
 | Factory installed onto a No. 26 high base, Red Wing Lathe.
Shipping Wgt.: 46 lbs [20.9 Kg] |
- 16SB-1 Chuk Changer By Handler
 | A Chuk/Changer in combination with a high base 1/3 HP two speed polishing motor No. 28. The 16SB-1 will allow the technician to utilize larger diameter buffs and abrasives, |
- 16B Chuk/Changer with Lathe By Handler
 | The 16 Chuk/Changer is factory installed to the right side of a 26A Low Base, Red Wing Lathe. This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds. |
- Dental Lathe chucks (Qty.6) By RayFoster
 | RayFoster Dental Lathe chucks
P91R Spiral Chuck for Rag Wheel, Right Side
P91L Spiral Chuck for Rag Wheel, Left Side
P93R Arbor Band Chuck, Right Side
P93L Arbor Band Chuck, Left Side
P94R Stone Chuck, Right Side
P94L Stone Chuck, Left Side
Manufacturer: RayFoster
Model: P91R+L,P9... |
- 67A Auto-Chuck Kit By Handler
 | An automatic chuck kit designed specifically for the changing of the chuck attachments listed below while lathe is in motion. The Auto-Chuck provides the user with fast chuck changing at a lower cost than many precision chucks. This chuck is designed for gross reduction and rough trimming. |
- 12 Stone Chuck (Pack of 14) By Handler
 | Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks. This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated. |
- 9 Arbor Band Chuck (Pack of 5) By Handler
- 8 Jacobs Type Jr. Chuck (Pack of 3) By Handler
 | The No. 8 chuck is designed for use on polishing motors which have a 1/2” [1.3cm] straight shaft. All specifications are identical to the 8T, except for its adaptation onto a 1/2” [1.3cm] shaft. |
- Dental Lathe Chuck Kit By Handler
 | Kit includes
13 Arbor Band Chuck
18 Atlas Precision Chuck
20 Tapered Chuck
67-0 Auto-Chuck
67B Auto-Chuck II
|
|
|
Curing Pots (2)
|
Dental Vibrators (12)
- DV36 Dental Vibrator By RayFoster
 | RayFoster DV36 Dental Vibrator
Manufacturer: RayFoster
Model: DV36
Ray Foster offers a choice of two dental vibrators perfect for any laboratory. From the gentlest vibration to a powerful shake, these vibrators offer quiet, creep-free performance for almost any application.
Our DV36 ... |
- DV34 Dental Vibrator By RayFoster
 | RayFoster DV34 Dental Vibrator
Manufacturer: RayFoster
Model: DV34
Ray Foster offers a choice of two dental vibrators perfect for any laboratory. From the gentlest vibration to a powerful shake, these vibrators offer quiet, creep-free performance for almost any application.
With the ... |
- 78-RK Atlas Heavy Duty Tri-Speed vibrator By Handler
 | Handler 78-RK Atlas Heavy Duty Tri-Speed vibrator
Manufacturer: Handler
Model: 78-RK
The NEW Handler 78-RK Heavy Duty Vibrator is built for durability and rugged use. The newly designed 78-RK has two frequencies each with variable speed. The HIGH and LOW are variable to allow a technici... |
- 78-1 Atlas Junior Vibrator By Handler
 | Handler 78-1 Atlas Junior Vibrator
Manufacturer: Handler
Model: 78-1
A three speed vibrator for use by the dentist or smaller laboratory. This is designed for compactness, longevity and intermittent use. Its 4” [10cm] diameter, removable, rubber covered table top makes it an ideal... |
- SplashCap Plastic Splash Guard By Buffalo Dental Manufacturing Co.,
 | SplashCap Plastic Splash Guard
(fits 1A and 1B Vibrators and helps prevent plaster from dripping on base) |
- No. 200 Extra-Heavy Duty Vibrator By Buffalo Dental Manufacturing Co.,
 | Buffalo's largest, most powerful Vibrator for Multiple Flasks and Dense Castings |
- No. 2 Heavy Duty Vibrator By Buffalo Dental Manufacturing Co.,
 | Rubbed 6" diameter rubber-covered platform to hold larger flasks. |
- No. 1B Vibrator By Buffalo Dental Manufacturing Co.,
 |
Hands-free foot pedal operation
Fully variable speed control
|
- No. 1A Vibrator By Buffalo Dental Manufacturing Co.,
 | Buffalos most popular small bench vibrator that is ideal for dental office laboratories. |
- Vibrator By JSP
 | Variable Speed Control |
- Investment vibrator 4" round By RAM Products, Inc
 | Variable speed dial
On/off switch
4" round table
Replaceable table cover
Heavy duty, compact, quiet |
- Investment vibrator large 6" x 8" By RAM Products, Inc.
 | Variable speed dial
On/off switch
6"X8" heavy duty table
Replaceable table cover
Heavy duty, quiet |
|
|
Disposable Plaster Traps (2)
|
Duplicators. (8)
|
Dust Collectors and Accessories (41)
- Microcab Handguard kit (Qty. 2) By Danville
- 66A Under Bench PORTA-VAC By Handler
 | Handler 66A Under Bench PORTA-VAC
Manufacturer: Handler
Model: 66A
An under bench single position dust collector for use in collecting dry grinding and polishing dusts from lathe or handpiece operations. The No. 66A Under bench Porta-Vac has a suction capacity of 150 CFM (cubic feet/min... |
- 550 Porta-Vac bench top dust collector By Handler
 | Handler 550 Porta-Vac bench top dust collector
Manufacturer: Handler
Model: 550
Handler Manufacturing announces a new and improved Porta-Vac unit Model #550. This is replacing the traditional Model #66 Porta-Vac. It is perfect for bench top light grinding and polishing with a hand piece... |
- 62 Super Sucker By Handler
 | Handler 62 Super Sucker
Manufacturer: Handler
Model: 62
Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 cfm (6.36M3/min) suction capacity through two top inlets. Dust and grindings are entrapped in a removable, disposable paper filter. A secondary polye... |
- 62-II Super Sucker II By Handler
 | Handler 62-II Super Sucker II
Manufacturer: Handler
Model: 62-II
62-II SUPER SUCKER: Designed to provide excellent suction to a single bench top work position. The 62-II Super Sucker develops 110 CFM ( cubic feet / minute) at a static pressure of 63" of H20 and is one of the most p... |
- Dust Inn 2000 By Deldent
 | Deldent Dust Inn 2000
Manufacturer: Deldent
Model: Dust Inn 2000
• Ideal for collecting spent grit and abrasive
• For use with all Miniblasters™ or Microetchers™ and for grinding procedures.
• New esthetic design offers more ... |
- MicroCab Plus Self Contained Dust Cabinet By Danville
 | Danville MicroCab Plus Self Contained Dust Cabinet
Manufacturer: Danville
Model: 91010
Microcab Plus is the most effective sandblast and grinding containment system available. Offering a large internal workspace, the Microcab Plus still maintains a small... |
- MacroCab Self-Contained Dust Cabinet By Danville
 | Danville MacroCab Self-Contained Dust Cabinet
Manufacturer: Danville
Model: 58600
Bright, fluorescent light provides ideal illumination. So compact yet so comfortable, you only insert your fingers with the handpiece to work.
Two size choices featuring... |
- MicroCab Safety Shields (Qty. 20) By Danville
 | Danville MicroCab Safety Shields (pack of 20)
Manufacturer: Danville
Model: 201359
Extend the life of your MacroCab or MacroCab window with disposable window shields. When placed under cabinets original window, these safety shields protect it from harsh ... |
- MacroCab Safety Shields (Qty. 20) By Danville
 | Danville MacroCab Safety Shields (pack of 20)
Manufacturer: Danville
Model: 201360
Extend the life of your MacroCab or MacroCab window with disposable window shields. When placed under cabinets original window, these safety shields protect it from harsh ... |
- CDC1 Dust Collector By RayFoster
 | RayFoster CDC1 Dust Collector
Manufacturer: RayFoster
Model: CDC1
The Ray Foster Cyclone Dust Collector is a powerful and efficient dust collector for use in the dental laboratory, designed for trouble-free performance and heavy-duty operation. Quiet, po... |
- CDC2 Dust Collector By RayFoster
 | RayFoster CDC2 Dust Collector
Manufacturer: RayFoster
Model: CDC2
The Ray Foster Cyclone Dust Collector is a powerful and efficient dust collector for use in the dental laboratory, designed for trouble-free performance and heavy-duty operation. Quiet, po... |
- Macrocab Handguard kit (Qty. 2) By Danville
- Microcab Plus Handguard kit (Qty: 2) By Danville
- Vanguard 1x without Accumulator for 1 station (1.5" x 4' Hose) By Vaniman
 |
High speed turbine technology producing high suction
Whisper quiet operation at 55 dbA
Low maintenance design
&nbs... |
- Vanguard 1x with Accumulator for 1 station (1.5" x 4' Hose) By Vaniman
 | High speed turbine technology producing high suction
Whisper quiet operation at 55 dbA
Low maintenance design
Optional additional HEPA and Odor Filtration
Optional Accessories:
Hepa Filter (P/N: 97016)
Odor Filter (Vanguard) (P/N: 96013)
Poly Guard II Shield (P/N: VMC-A398)
... |
- Vanguard Gold 2X (1 station) without Accumulator (2.5" Hose, expands to 6') By Vaniman
 | High speed turbine technology producing high suction
One or two stations, multi-speed
Whisper quiet operation at 55 dbA
Low maintenance design
Optional additional HEPA and Odor Filtration
Optional Accessories:
Hepa Filter (P/N: 97016)
Odor Filter (Vanguard) (P/N... |
- Vanguard Gold 2X for 2 Stations without Accumulator (2-2.5" X 4' Hoses with Tee) By Vaniman
 | High speed turbine technology producing high suction
One or two stations, multi-speed
Whisper quiet operation at 55 dbA
Low maintenance design
Optional additional HEPA and Odor Filtration
Optional Accessories:
Hepa Filter (P/N: 97016)
Odor Filter (Vanguard) (P/N: 96013)
Poly Guar... |
- Vanguard Platinum 2X (Single Station) without Accumulator (2.5" Hose, expands to 6') By Vaniman
 | High speed turbine technology producing high suction
One or two stations with variable speed control
Whisper quiet operation at 55 dbA
Autopilot for handpiece synchronization
Optional Air Autopilot for air handpiece control
Automatic Bag Full indicator
Tri-filtration built-in
High p... |
- Vanguard Gold 2X with Accumulator (2.5" Hose, expamds to 6') By Vaniman
 | High speed turbine technology producing high suction
One or two stations, multi-speed
Whisper quiet operation at 55 dbA
Low maintenance design
Optional additional HEPA and Odor Filtration
Optional Accessories:
Hepa Filter (P/N: 97016)
Odor Filter (Vanguard) (P/N: 96013)
Poly Guar... |
- Vanguard Gold 2X with Accumulator for 2 Stations (2-1.5" X 4' Hoses) By Vaniman
 | High speed turbine technology producing high suction
One or two stations, multi-speed
Whisper quiet operation at 55 dbA
Low maintenance design
Optional additional HEPA and Odor Filtration
Optional Accessories:
Hepa Filter (P/N: 97016)
Odor Filter (Vanguard) (P/N: 96013)
Poly Guar... |
- Vanguard Platinum 2X with accumulator for 1 station (2.5" Hose, expands to 6') By Vaniman
 | High speed turbine technology producing high suction
One or two stations with variable speed control
Whisper quiet operation at 55 dbA
Autopilot for handpiece synchronization
Optional Air Autopilot for air handpiece control
Automatic Bag Full indicator
Tri-filtration built-in
High p... |
- Vanguard Platinum 2X with Accumulator for 2 Station (2-1.5" x 4' Hoses) By Vaniman
 | High speed turbine technology producing high suction
One or two stations with variable speed control
Whisper quiet operation at 55 dbA
Autopilot for handpiece synchronization
Optional Air Autopilot for air handpiece control
Automatic Bag Full indicator
Tri-filtration built-in
High p... |
- V6 (High Suction) For up to 6 Stations By Vaniman
 | New ultra quiet brushless motor (59 decibels on high)
Six workstation operation
Variable speed control
Hepa cartridge filtration
Push button “Air-Pulse” filter maintenance system
Large dust collection tray
Replacement Parts:
V-Six HEPA Filter (P/N: 9... |
- Vanguard HV (High Volume) with 10' of 2.5" hose and fittings for two to four stations By Vaniman
 | Full one horsepower Brushless motor moves 750 cubic feet per minute
Handles up to four workstations
Unit operates in horizontal or vertical position
Noise arresting system makes unit quietest available , 55 Decibels
Add remotes for control up to four stations
Low maintenance design
Avail... |
- Vanguard HV (High Volume) with 10' of 3" hose and fittings for two to four stations By Vaniman
 |
Full one horsepower Brushless motor moves 750 cubic feet per minute
Handles up to four workstations
Unit operates in horizontal or vertical position
Noise arresting system makes unit quietest available , 55 Decibels
Add remotes for control up to four stations
Low maintenance design
Ava... |
- SandVac (For Blasters) 1 Station with Accumulator and Foot Remote (2.5" Hose, expandable to 6') By Vaniman
 | Powerful suction
Quiet operation (55dbA)
Compact, space saving design
Dual function remote control included
Accumulator pre-filter captures 95% of all dust and 99% of all abrasive media
Plug in your micro-abrasive blaster and control both with one easy step
Replacement Parts:
... |
- Stone Vac II, 1 Station* (2.5" Hose, expandable to 6') By Vaniman
 | Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
Exclusive built-in electric filter cleaning system
Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
Bagless design
Can be configured as a two station sy... |
- StoneVac II (with Accumulator) By Vaniman
 | Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
Exclusive built-in electric filter cleaning system
Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
Bagless design
Can be configured as a two station sy... |
- StoneVac II Plus (with micromotor control) For 1 Station* (2.5" Hose, expandable to 6') By Vaniman
 | Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
Exclusive built-in electric filter cleaning system
Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
Bagless design
Can be configured as a two station sy... |
- StoneVac II Brushless For 1 Station* (2.5" Hose, expandable to 6') By Vaniman
 | Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
Exclusive built-in electric filter cleaning system
Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
Bagless design
Can be configured as a two station sy... |
- StoneVac II Brushless w/Accumulator By Vaniman
 | Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
Exclusive built-in electric filter cleaning system
Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
Bagless design
Can be configured as a two station sy... |
- Opti™ Workstation By Buffalo Dental Manufacturing Co.,
 | The Opti Workstation is an effective compact laboratory workstation with bright illumination and built-in dust collection. |
- Illuminated AirPot (with light & adjustable plexi-shield) By QUATRO
 | Features Illuminated work surface
FlexShield safeguards technician from particles entering breathing zone
Mobile ergonomic attachment with "Wrist-Rest" comfort cushion control
Provides total mobile bench-top versatility
Build-in cushion top enhances comfort and manual dexterity
... |
- Replacement Window for MacroCab Self-contained Dust Cabinet By Danville
- Dust Collector By JSP
 | Ideal for dental laboratories and jewelers workshops. |
- DustClear™ PreFilter Dust Collection System By Buffalo Dental Manufacturing Co.,
 | DustClear is an efficient dust collection cabinet that features innovative AirReverse™ filter cleaning technology. |
- DustStation™ I By Buffalo Dental Manufacturing Co.,
 | DustStation I is a high performance, commercial grade dust collection system
that features powerful suction, quiet operation and a unique and effective easy
cleaning filtration system. 21” H x 15” W x 15” D, Wt. 73 lbs |
- Workbench Suction Drawer By Buffalo Dental Manufacturing Co.,
 | The easy to install, fully functional, small dust collection system that convenientlymounts under your work surface and extends when needed, but tucks away when not in use. |
- Dust-Inn replacement dome By Deldent
 | Description: Dust-Inn replacement dome with handguards |
- Replacement Motor/Fan for 62 Super Sucker By Handler
|
|
Econo Air Systems (2)
- Econo Air System - ADU-07 By Aseptico
 | Economical pneumatic handpiece control system for dental operators, hygienist's room or satellite office. Features: Manual controls of one highspeed handpiece and one low speed (no water). Three way air/water syringe with three autoclavable tips. Handpiece coolant water on/off with flow contro... |
- Two Handpiece Manual Control System By Aseptico
 | Features 3-way syringe, two handpiece controls-1 highspeed/1 low speed, handpiece and water coolant adjustments, pressure gauge and variable foot control.
Requires air and water connections. |
|
|
Electric Lab Handpiece Systems (29)
- AEU-08D Economy Electric Motor Handpiece System By Aseptico
 | Aseptico AEU-08D Economy Electric Motor Handpiece System
Manufacturer: Aseptico
Model: AEU-08D
The AEU-08D is a low cost versatile electric motor system that is perfect for chairside adjustments, polishing and lab work.
•Good torque.
•Lightweight sealed motor housing.
&b... |
- FC330 Handpiece for Flex-Shaft By Buffalo Dental Manufacturing Co.,
 | A heavy-duty handpiece designed for laboratory, jewelry, and industrial use. |
- X35 35000 rpm Standard Black Electric Handpiece, By Buffalo
 | Standard Black Electric
Handpiece Only
V35 System, 120 V AC |
- 1057 - Handpiece 35 By Nouvag
 | with clamp Ø 2.35 mm |
- 1433 - Handpiece By Nouvag
 | with clamp Ø 2.35 mm |
- RX control box only By RAM Products, Inc.
 | Simply the value in quality and durability based on our 20 year experiece
Precision built for performance from Japan
Heavy duty, reliable
Lots of power and torque |
- Rampower35 control box, Tech 2000 HP By RAM Products, Inc.
 | RAM POWER 35 CONTROL BOX
0-32 volts dc output
High power - high torque
Selection for Hand/Foot Control
Selection for Forward/Reverse direction
Variable speed dial 0-35,000 RPM
Safety overload protection and reset button
Torque feedback circuitry
110 volts / 230 volts - dual input volta... |
- Rampower 35 control box only By RAM Products, Inc.
 | RAM POWER 35 CONTROL BOX
0-32 volts dc output
High power - high torque
Selection for Hand/Foot Control
Selection for Forward/Reverse direction
Variable speed dial 0-35,000 RPM
Safety overload protection and reset button
Torque feedback circuitry
110 volts / 230 volts - dual input volta... |
- Rampower45 control box, 45000 rpm HP By RAM Products, Inc.
 | RAM POWER 45 CONTROL BOX
0-32 volts dc output
High power - high torque
Selection for Hand/Foot Control
Selection for Forward/Reverse direction
Variable speed dial 0-45,000 RPM
Safety overload protection and reset button
Torque feedback circuitry
110 volts / 230 volts - dual input vol... |
- Rampower 45 control box only By RAM Products, Inc.
 | RAM POWER 45 CONTROL BOX
0-32 volts dc output
High power - high torque
Selection for Hand/Foot Control
Selection for Forward/Reverse direction
Variable speed dial 0-45,000 RPM
Safety overload protection and reset button
Torque feedback circuitry
110 volts / 230 volts - dual input vol... |
- Rampro500N control box, Tech2000 HP By RAM Products, Inc.
 | Improved Features:
Improved Features:
Heavy Duty Transformer provides lots of power
Memory chip for 3 memory buttons (preset speeds) for you to customize and change anytime (like a car radio).
Memory feature remembers last speed setting before unit is turned off.
Specifications:
... |
- Rampro500N control box only By RAM Products, Inc.
 | Improved Features:
Heavy Duty Transformer provides lots of power
Memory chip for 3 memory buttons (preset speeds) for you to customize and change anytime (like a car radio).
Memory feature remembers last speed setting before unit is turned off.
|
- Rampro500N control box, 45000rpm HP By RAM Products, Inc.
 | Improved Features:
Heavy Duty Transformer provides lots of power
Memory chip for 3 memory buttons (preset speeds) for you to customize and change anytime (like a car radio).
Memory feature remembers last speed setting before unit is turned off.
Specifications:
Computer controlled mi... |
- Microlab350 control box, Tech2000 HP by RAM Products, Inc.
 | Forward/Reverse operation
0 - 35,000 RPM
Thermal resetable fuse for safety overload and protection.
110/220V 50/60Hz operation
Set includes control box, on/off pedal, Tech 2000 Handpiece, Handpiece stand. |
- Microlab350 control box only, By RAM Products, Inc.
 | Forward/Reverse operation
0 - 35,000 RPM
Thermal resetable fuse for safety overload and protection.
110/220V 50/60Hz operation |
- Microlab450 control box, 45000rpm HP, By RAM Products, Inc.
 | Forward/Reverse operation
0 - 45,000 RPM
Thermal resetable fuse for safety overload and protection.
110/220V 50/60Hz operation
Set includes control box, on/off pedal, 45,000 Handpiece, Handpiece stand. |
- Microlab450 control box only By RAM Products, Inc.
 | Forward/Reverse operation
0 - 45,000 RPM
Thermal resetable fuse for safety overload and protection.
110/220V 50/60Hz operation |
- Microtorque control box, Pedal (Variable) By RAM Products, Inc.
 | The Microtorque II control box is make in America with American technology. The Microtorque control box circuitry design provides smooth constant power at all speeds from 0 - 35,000 RPM with excellent protection from thermal overload and current limiting. options: eithe... |
- Microtorque control box, Pedal (ON/OFF) By RAM Products, Inc.
 | The Microtorque II control box is make in America with American technology. The Microtorque control box circuitry design provides smooth constant power at all speeds from 0 - 35,000 RPM with excellent protection from thermal overload and current limiting. options: eithe... |
- Microtorque control box only, By RAM Products, Inc.
 | The Microtorque II control box is make in America with American technology. The Microtorque control box circuitry design provides smooth constant power at all speeds from 0 - 35,000 RPM with excellent protection from thermal overload and current limiting. options: either hand or foot oper... |
- FC345 Handpiece for Flex-Shaft By Buffalo Dental Manufacturing Co.,
 | A heavy-duty handpiece designed primarily for industrial and woodworking applications. |
- NextGen control box only By RAM Products, Inc.
 | Compact desktop control box design
Technically advanced microprocessor controls
Easy to use push button controls with indicators
Standby power mode for safety and reliability
Soft starting and stopping
|
- UP500 control box, UG handpiece, VC60 pedal, By RAM Products, Inc.
 | U Power UG33 handpiece, UP500 control box and variable speed foot control.
An industry leader in handpieces for years, great for dental laboratory use.
this control box can control 2 seperate handpieces.
Complete setup includes: UPower UG33 handpiece, variable foot control, and UPower ... |
- U-Power Control box only By RAM Products, Inc.
 | this control box can control 2 seperate handpieces. |
- Magic Wand™ Electric Lab Handpiece System By Buffalo Dental Manufacturing Co.,
 | A medium-torque, electric handpiece system with a Standard Handpiece that offers cutting speeds to 35,000 RPM and is operated by a Variable Speed Control. |
- Premium Electric Lab Handpiece System By Buffalo Dental Manufacturing Co.,
 | The new black signature handpiece features an improved heavy-duty spindle, upgraded bearings, and more durable square carbon brushes, providing smoother operation and increased reliability |
- X40 Premium Electric Lab Handpiece System By Buffalo Dental Manufacturing Co.,
 | New 40,000 RPM High-Torque System Updates Our Classic X35 and Provides Additional Speed and Torque |
- X50 Brushless Electric Lab Handpiece System By Buffalo Dental Manufacturing Co.,
 | Premium 50,000 RPM High Torque System! |
- M35 Compact Electric Lab Handpiece System By Buffalo Dental Manufacturing Co.,
 | New High Torque Variable Speed System Features a Compact and Versatile Design |
|
|
Electric Lab Motors (6)
|
Electric Motor Systems (10)
- Torque Plus - AEU-12C By Aseptico
 | Aseptico Torque Plus - AEU-12C
Manufacturer: Aseptico
Model: AEU-12C
Very versatile High torque hand engine. The ideal motor for all day heavy duty laboratory work, chairside adjustments, polishing, etc.
• Detachable, "E" type autoclavable handpiece.
• Torque com... |
- Porta-Tip - AEU-03SS By Aseptico
 | Aseptico Porta-Tip - AEU-03SS
Manufacturer: Aseptico
Model: AEU-03SS
• This fine portable and versatile system, with its rechargeable battery, is made by Aseptico in the USA. Power unit, motor, handpiece - all supported by Aseptico's service and supply. Excellent reliability. Comes... |
- Variable Speed Foot Control By Aseptico
- Power-Tip - AEU-10SS By Aseptico
 | Aseptico Power-Tip - AEU-10SS
Manufacturer: Aseptico
Model: AEU-10SS
• Motor and handpiece built and serviced by Aseptico.
• This is a reliable and economical unit for chairside adjustments.
• Size: 4.5" x 3.5" x 2". 120 or 220 volt available.
• Var... |
- Electric Operative Motor By Aseptico
 | Powerfull, brushless, 40,000 rpm, autoclavable micromotor |
- NM 3000 Motor System (Table-Top Model) By Nouvag
 | The Nouvag NM 3000 motor system is a universal motor drive for light grinding and routing tasks |
- NM 3000 Motor System (Knee Model) By Nouvag
 | The Nouvag NM 3000 motor system is a universal motor drive for light grinding and routing tasks. |
- Marathon N7 Micromotor and Handpiece By TPC
 | TPC Marathon N7 Micromotor and Handpiece
Manufacturer: TPC
Model: MM7
• Powerful torque and variable speed motor
• No heat after long hours of operation
• Easy change of driving direction for effi ciency
• Variable speed foot control
• Compact and ergonomic ... |
- AEU-16C Torque Plus Electronic Motor Systems By Aseptico
 | Aseptico AEU-16C Torque Plus Electronic Motor Systems
Manufacturer: Aseptico
Model: AEU-16C
High torque dental laboratory hand engine. The ideal motor for all day heavy duty laboratory work.
•Torque compensation circuitry.
•Forward/reverse operation.
•Includes on/off... |
- RX style E-type motor only By RAM Products, Inc.
 | Simply the value in quality and durability based on our 20 year experiece
Precision built for performance from Japan
Heavy duty, reliable
Lots of power and torque |
|
|
Electric Motors (7)
|
|
|
